|
Question Posted By: Guest on 4-16-2009
Back to Questions
| Make of Bike: |
dyna super glide |
| Model of Bike |
fxdi |
| Year of Bike |
2004 |
| Engine Size |
1450 |
| Other info on Bike |
|
| What's your question? |
when coming to a stop bike sometimes dies any suggestions
|
| Details: |
|
Answers:
- pull on the clutch handle when you're stopping... By: Guest on: 4-16-2009
- Let's be a little more constructive in our responses (Guest).
True, it could be a clutch cable adjustment that's needed. Does it shift into neutral easily? Does it want to pull when in gear and the clutch lever is bottomed out on the grip? If not, then it may be fuel delivery. A quick stop at any place that knows how to use an EGA (exhaust gas analyzer) will tell you your A/F mixture at idle. Rather it's mix at idle, or the mechanical adjustment. Sometimes it's even shit gas. By: 47Knuckle-Dragger on: 4-16-2009
- I have read that is a 1st indication sign of a bad delivery hose from gas tank. you do not need to replace pump to replace hose, just the hose. By: wingman on: 4-18-2009
- how about raising the idle a little By: Guest on: 4-18-2009
- buy a extyent4ed vwarraty By: Guest on: 4-19-2009
- any other things?? like failure to maintain speed ?? the hose gets a hole rubbed in tank. good info. on this in HD yahoo group forums. By: Guest on: 4-19-2009
- "buy a extyent4ed vwarraty"
WTF is a 'extyent4ed vwarraty'? Skipped too many school days, did you? By: 47Knuckle-Dragger on: 4-19-2009
- A hole in the fuel line would effect the way the bike ran at all times, not just coming to a stop. Loss of fuel ressure. Not common on Dyna model, more common on softails, especially deuce models. By: Guest on: 4-19-2009
- Is the bike throwing engine codes? I'm suspecting the Idle air control motor is sticking open. Hold the trip reset button in and turn on the ignition, with the kill switch on, the odometer will read diag, then p s sp t. when the p is flashing, hold the reset button in, and it will give you a code. By: Guest on: 4-19-2009
- take the bike to get engine codes, i had similar poblem last year. Engine temp sensor was out.. damn computers. By: Guest on: 4-20-2009
- I have a 04 superglide with the same problem. It only does it when I come to a stop after a few miles on the highway. She also throws a 1357/1358 alot, but has never had a miss (at least I have never noticed a miss)
So far I have thrown a coil, fuel line, and a few sensors at it. I have checked the voltage and draw on the battery across the rpm range, stopped using "NGK" plugs (that slowed the 1375/1358 codes, but has not stopped them), fuel psi is fine even when it happens.
After doing a little homework, I am starting to think it is the stage 1 map. I should have the coin to work on that in a couple of months, going to put a thunder module (around 1000$) on her. I will post anything I find out.
I have noticed that if you shut the motor down and restart before you get to a stop sign it wont do it. As of right now, I just treat it like a cold shovelhead, keep throttling it. By: Jinx on: 5-26-2009
Reads: 751
|
|
Home
