|
Tech Tips:
|
| |
|
Goodson air cleaner late
I'm new to OBW and I saw the old post about the Goodson aircleaner backing pate. I don't think anyone answered the question so I'll do my best. Dennis Goodson makes backing plates for most carbs. If y... Continue
|
| |
|
Posted By johnnymac on 10/20/06 | Tech Tips
comment?
|
Reads: 2282 | 
|
| |
|
supertrap pipes on FLSTC
I have a FLSTCI (2003) and ordered some 2 into 1 supertrap pipes for it. When they arrived I took them to my local stealer to install (since I also needed a dyno for the new pipes). The stealer mech... Continue
|
| |
|
Posted By hostile1 on 09/12/06 | Tech Tips
3 comments
|
Reads: 3215 |
|
| |
|
Help With pipes
need to know anything about changing my stockies to rinehart, what is it going to do to the warenty and what about the cops? then help me find someone to install them because I have not been able to ... Continue
|
| |
|
Posted By Anonymous on 09/09/06 | Tech Tips
10 comments
|
Reads: 4069 |
|
| |
|
Goodson Air Cleaner
Does anyone know how to install a Goodson Air cleaner cover on a '02 CV carb? Do you need to modify the backing plate for the carb or the barrels on the long bolts from the stock install? Also what do... Continue
|
| |
|
Posted By Anonymous on 08/17/06 | Tech Tips
comment?
|
Reads: 1685 |
|
| |
|
curb idle (1 more time)
I'm no cert. wrench but i work on mine, and the only thing i know for sure about turning the idle up a hair, i learned last week at MVD.
Idle at 800 = failed emissions Idle at 1050 = passed emission... Continue
|
| |
|
Posted By Batpappy on 08/16/06 | Tech Tips
comment?
|
Reads: 2033 |
|
| |
|
2004 883 custom
hi folks hope someone can heip me out looking to put raked wide glide triple trees on to my bike and put 16" wheel up front can anyone tell me if i go 6 degree rake how much over on the length of fork... Continue
|
| |
|
Posted By skaboo on 07/30/06 | Tech Tips
comment?
|
Reads: 1454 |
|
| |
|
low curb idle
i just wanted to weigh in on the curb idle tip, first how low of an idle are we talking about? any lower than 450 or 500 the engine is gonna stall anyhow. the oil pressure comment is simply not true. ... Continue
|
| |
|
Posted By cavemanvt on 07/11/06 | Tech Tips
comment?
|
Reads: 1805 |
|
| |
|
Road Tools:
Basically, you only need two tools:
WD40 and DUCT-TAPE. If it doesn't move and should...WD40. If it moves and shouldn't...DUCT-TAPE.
Dogberry neuromediator son glycolonitri... Continue
|
| |
|
Posted By 47Knuckle-Dragger on 06/25/06 | Tech Tips
comment?
|
Reads: 1588 |
|
| |
|
Carburetor curb idle
With 30 years of Harleys under my belt I just learned something of great importance.If your curb idle is not set high enough on a carbureted machine it will affect the machines performance throughout ... Continue
|
| |
|
Posted By Stoney on 06/23/06 | Tech Tips
1 comment
|
Reads: 3171 |
|
| |
|
inexpensive repair for carb diaphrams
In January of last year while checking the sync on my carbs, I noticed #1 & 3 cylinders, fluctuating badly on the mercury gauge, while 2 & 4 were steady as a rock at 18cm mercury. So, I started checki... Continue
|
| |
|
Posted By ntxwheels on 06/10/06 | Tech Tips
2 comments
|
Reads: 1754 |
|
| |
|
Previous 10 records |
| |
|
Next 10 records è |
Home
