Got a problem with your scoot? Plenty of old greybeards that know their shit here...and owners of newer motorcycles willing to help out with your problems, or just questions in general about your scoot. All ya' gotta do is ask...
TEST-IGNORE by: 47Knuckle-Dragger on: 3/8/2010 -
|
Two men offering help and guidance, one problem. One says take it directly to a dyno. The other says tweak it by ear, ride it a while and tweak it as needed. Want it right but dyno in this area is $30 by: madmidget on: 2/15/2010 -
6 repl
ies
|
Are an 80ci and 74ci intake manifold for evo's interchangeable? by: Sword on: 2/9/2010 -
14 repl
ies
|
Catalytic converter needs to go away. by: tealharley on: 2/8/2010 -
2 repl
ies
|
i have a stock bat wing faring that i want to install i have all gaudes and wireing is no problem what about cables and brake lines and handle bars what am i if for by: marine1 on: 1/29/2010 -
4 repl
ies
|
want to add batwing faring now only have clear windsheld i belive i have all parts for change over.what am i infor ? by: marine1 on: 1/28/2010 -
2 repl
ies
|
Any experince out there using the engine guard to cool the oil? by: CutterOIMC on: 1/28/2010 -
7 repl
ies
|
this has had a lowering kit put in it and it bottoms out so bad it is braking braces in the fairing. not happy. does anyone have info on progressive monotube cartridge kits are they worth the money by: smcdon on: 1/23/2010 -
3 repl
ies
|
put a hd lowering kit in front, bottoms out bad. can you get rid of the dampning valve in left fork and go back old school with same spring set up in both sides by: smcdon on: 1/22/2010 -
2 repl
ies
|
I want to start a new MC in Buffalo, what other club are in the area taha I should talk to first? by: godsmack on: 1/19/2010 -
8 repl
ies
|
Last year at a ralley, I saw a triple tree that you could change the rake on. It was on a dyna. the guy had changed it to a wide front end. it looked gooood.Any idea who makes them or where I can get by: lisa on: 1/14/2010 -
5 repl
ies
|
i want to run the wire in side thehandlebars on my bike. I have mini apes on it, and have already extened the wires about 8. i like to do my own toolin on my scoot. by: lisa on: 1/10/2010 -
6 repl
ies
|
I've been dealing with this spitting and coughing for over year. I tried running it at 1/4 choke until it warms up then no choke. Three different people have looked at it. I have also been fouling plu by: rickyj on: 12/29/2009 -
16 repl
ies
|
need info on the hell lovers. are they legit or what? can't seem to find anything about them on the web to amount to anything. by: stilts on: 12/22/2009 -
6 repl
ies
|
want to know where i can find a 6 speed tranny (that fits)for my shovel.....has the original 4 speed factory.....for less than 30.000 dollars everybody wants.....thanks for any info. by: 82shovel82 on: 12/17/2009 -
4 repl
ies
|
OIL COOLER by: 89SOFTAIL on: 11/14/2009 -
3 repl
ies
|
xmsn extremely hard to shift. running Primo Brute III Enclosed Belt drive. Dry clutch set up. by: bikernerd99 on: 11/13/2009 -
3 repl
ies
|
manifold requirements for Mikuni carb by: bikernerd99 on: 11/3/2009 -
4 repl
ies
|
Compatibility between servi car rear ends. by: beau on: 10/11/2009 -
5 repl
ies
|
Has anyone ever tried to mount a fatboy style fender to a stock 97 springer frontend. Would like to change to a 16in. wheel, but don't want to use the typical springer fender. by: unstable1 on: 9/13/2009 -
37 repl
ies
|
I haveing trouble finding after market lights for down beside the saddle bags, They mount to the crash bars, by: ringo on: 9/4/2009 -
5 repl
ies
|
can someone tell me the diffrence between sidecar brake drums from 1976-1979, and the earlyer ones? can I use an earler one on a 76-79 axle and brake set up? by: 4harleys on: 9/4/2009 -
4 repl
ies
|
does the right hand side small rear axle spacer go the inside or outside of the brake caliper. fucked up and forgot to look b4 dropping the wheel.
thanks by: beau on: 8/24/2009 -
2 repl
ies
|
Bought a set of forward controls for the bike, Is it necessary to remove the
outer primary cover or can I use the existing shifter arm? by: Mikeski on: 8/17/2009 -
2 repl
ies
|
under a load on a hill bike starts to ping loses power and smokes out of the left tail pipe have true duels changed piston rings homed cylinder still does the same thing need help 1340 evo by: mcclood on: 8/15/2009 -
35 repl
ies
|
WHEN I STARTED MY BIKE IT STARTED SMOKING FLAMED UP WHEAR THE REGULATER STATOR PLUG IN AT , WHEAR SHOULD I START , STATOR OR VOLTAGE REGULATOR? OR ALL OF THE CHARGING SYSTEM ? by: JRC on: 8/6/2009 -
5 repl
ies
|
I have an electrical problem. The battery has a constant drain on it. I've traced all the wires back to the dash, no bare wires. now what??? by: TinyVNVMC on: 8/6/2009 -
4 repl
ies
|
Can't find reason for wobble staring at 75-80 MPH by: jas on: 7/31/2009 -
25 repl
ies
|
I'm wondering how many miles I can expect from my bike. 130K easy miles, oil change at 2500 usually with very little hot-rodding. The cam chain tensioners were changed at 65K inner primary gasket at by: capnbill on: 7/18/2009 -
3 repl
ies
|
Looking for info about open vs. covered air cleaner filters... Any issues with rain, tearing, etc with open filters. Putting a Ness Big Sucker on with Rineharts, and deciding on the cover.
Thanks by: jsaleone on: 7/11/2009 -
4 repl
ies
|
PUT IN A 95 BIGBORE KIT AND GEARDRIVE CAM KIT RODE ABOUT A 1000 MILES NOW LEAKING OIL FROM BOTTOM OF CASES WERE THEY MEET NOT SURE HOW OR WHAT HAS CAUSED IT by: KSWOLF on: 7/7/2009 -
2 repl
ies
|
How do I get the swing arm open to get the new belt on? Do I need to take off the pipes? by: skmcrider on: 7/7/2009 -
2 repl
ies
|
Tank is starting to leak a bit from the middle tank mount. Had it welded 2-3 years ago. Red Kote or ?? Any suggestions? I'm not ready for a new tank just yet...Thanks by: FMFDoc on: 6/22/2009 -
7 repl
ies
|
coughing and spitting when cold by: roymech427 on: 6/5/2009 -
20 repl
ies
|
put 18 apes on it used harley pre wired harness for throttle by wire throttle now has dead spot at low speed and throttle seems sluggish now possible problem ohms because of length of wire ? by: rommel on: 6/4/2009 -
3 repl
ies
|
testing by: THUMPERRRR on: 6/4/2009 -
1 repl
y
|
trying to find true dules that are loud but have a deep tone to them. I have been having trouble finding any. Harley said they don't make any for the 09's yet. Can anyone point me in the right direct by: Kurt on: 5/27/2009 -
9 repl
ies
|
No question, info. Thanks all for answering and help. Found what I was looking for. Stealership part!!! Called a windshield visor for XL and FXR and Dyna. Obsolete part, but still a few around. Again by: chuck on: 5/20/2009 -
|
engine is to rich, after a ride the plugs get sooty by: ringo on: 5/15/2009 -
4 repl
ies
|
On the below question. I know there are baby windshields available. I'm looking for the ones like on the V-Rods, that go under the headlight. by: chuck on: 5/7/2009 -
1 repl
y
|
Have asked in the past about a headlight fairing. I have since seen on Sportys and FXR's a thing called a flyscreen. Can't find info on one anywhere. Any help would be appreciated. by: chuck on: 5/7/2009 -
4 repl
ies
|
anyone no of an aftermarket amp that will plug into radio can barely hear it over rhinehart pipes by: BOX1 on: 5/2/2009 -
5 repl
ies
|
Just got bike up and running, adjusted clutch acording to manual, put about 150 miles on it and the bike was pulling or stalling when I stop,re-adjusted, put about 30 miles had to re-adjust again,put by: zoom on: 5/1/2009 -
3 repl
ies
|
getting old and cant remember or find diagram for rewiring ignition switch straight from the battery
6 post HD swith. head/tail lts. generator,coil, nuetral and oil lights are all that are run.
Help by: sfrecrutr on: 4/25/2009 -
7 repl
ies
|
HOW DO YOU TAKE OUT BAFFLES? by: keimtwo on: 4/25/2009 -
4 repl
ies
|
WROTE IN BEFORE ON EXCESS OIL OUT OF CRANKCASE BREATHER. WHAT SHOULD OIL PRESSURE BE? I HAVE 15LB @ IDLE 40LB ABOVE 2000RPM by: garyhaller on: 4/24/2009 -
2 repl
ies
|
Main drive bearing - how big a job to replace? by: PuertoRican on: 4/22/2009 -
2 repl
ies
|
FXDXT fairing wanted by: seedy on: 4/21/2009 -
3 repl
ies
|
JUST REPLACED FRONT BRAKE LINE REFILLED TRIED TO BLEED IT BUT IT WILL NOT PRESSURE UP I GET FLUID JUST WONT PUMP UP ANY SUGETIONS by: JRC on: 4/19/2009 -
5 repl
ies
|
when coming to a stop bike sometimes dies any suggestions by: Guest on: 4/16/2009 -
11 repl
ies
|
Puking lots of oil out of vent by: bobp on: 4/14/2009 -
3 repl
ies
|
Looking for a headlight fairing and or small handlebar fairing. Anybody know who makes one. BTY, Stock 39mm front end. Thanks. by: chuck on: 4/14/2009 -
1 repl
y
|
This may have been asked before but is there a rigid frame for wideglides out there? Something that everything from mine swaps to? by: floorjack on: 4/6/2009 -
2 repl
ies
|
My brother owns this piece of bling, and wants to take his starter out. by: poet1369 on: 4/5/2009 -
4 repl
ies
|
i put new mufflers on this thing will it affect the MAP or the computer if i take the baffles out? by: roymech427 on: 4/3/2009 -
2 repl
ies
|
Wondering about a motor. by: cross on: 4/1/2009 -
4 repl
ies
|
why would motor start puking oil out of crankcase breather? by: Guest on: 3/29/2009 -
5 repl
ies
|
Took the front tubes apart!
by: tat2d142 on: 3/19/2009 -
6 repl
ies
|
Has a Linkert M-18 carb. I can get it started but it won't stay running.Followed user manual and also Linkert's site for setting low speed idle.No dice. Riding season is now!!!Thanks for any help. by: servicarseth on: 3/18/2009 -
2 repl
ies
|
ANYTHING YOU WANT TO KNOW ABOUT A CV CARB GO TO HARLEY-PERFORMANCE.COM by: moonhogg100 on: 3/17/2009 -
2 repl
ies
|
Replacing pipes by: AZTECAJC on: 3/16/2009 -
2 repl
ies
|
any one have experience with the Power Booster kit for the SS Super E carb? just trying to find a low $$$ means of getting a couple more horses. Thanks for any input... by: bikernerd99 on: 3/13/2009 -
2 repl
ies
|
MY 97 SPRINGER FRONT AXLE KEEPS TURNING, AXLE NUTS ARE TIGHT. by: Guest on: 3/8/2009 -
4 repl
ies
|
Im thinking of putting a springer front end on this sporty. Is it a 1 inch neck stem? by: Nasty on: 3/8/2009 -
4 repl
ies
|
REPLACED MY 21 IN. FRONT TIRE WITH A 16. IS THERE ANY WAY OF MOUNTING A SHORT CUSTOM FRONT FENDER, OR IS THERE A KIT AVAILIABLE ? by: unstable1 on: 3/6/2009 -
1 repl
y
|
The bike is having an oiul consumption problem. I live 425 from Sturgis when I got there I needed a quart of oil. When I left I made it about 300 miles before needing another quart. by: Guest on: 2/26/2009 -
4 repl
ies
|
I am looking at buying a frame for this bike off e-bay. It is an original frame but has a salvage title because it had been stolen and stripped at one time. Does anyone have any opinions on this? Is t by: Featherwolf on: 2/22/2009 -
3 repl
ies
|
what yr. did hd start putting these dam computers on there bikes. by: liveharley on: 2/22/2009 -
4 repl
ies
|
No spark in cold temps by: NvBiker on: 2/17/2009 -
6 repl
ies
|
Right adjuster on back tire keeps loosening up. I can here the stop plate rattle just after a couple miles after i have made adjustments. by: fmreb on: 2/11/2009 -
3 repl
ies
|
Legend air ride will pump up when you push switch one way but wont releaase air when switch is pushed down. by: grizzly08 on: 2/11/2009 -
|
custom/simplified wiring harness by: bikernerd99 on: 1/24/2009 -
7 repl
ies
|
How difficult is it to install a Baker 5 speed smooth shift drum? Is it an operation that call for special tools or can I do it in my garage? by: HD3006 on: 1/11/2009 -
1 repl
y
|
Any carb adjustment tips ? by: madmidget on: 1/9/2009 -
13 repl
ies
|
Bike doesn't seem to be charging. Can I check the charging myself? by: Guest on: 1/7/2009 -
5 repl
ies
|
I would like bag lights, but Harley lights are 700.00 and its to expensive, is there other manifacturs of this type of light system that could be cheaper.. by: ringo on: 12/27/2008 -
2 repl
ies
|
I need info on doing timing on a single cyliner bike with electronic ignition. Please. by: debb on: 12/26/2008 -
6 repl
ies
|
oil pump showing signs of scoring by: CtJim on: 12/19/2008 -
4 repl
ies
|
I want to build a bike from bare frame up. Can anyone let me know what model of Harley and year that would be the cheapest? No sportsters i'm too tall and heavy. thank you by: Guest on: 11/27/2008 -
11 repl
ies
|
I need a wiring diagram for my 1974 XLCH sportster by: Guest on: 11/27/2008 -
3 repl
ies
|
tire balancing by: 911JB on: 11/14/2008 -
|
blubber, or backfire on deceleration,installed power commander and checked slip-on's(Samsom rolled thunder)and no leaks. when blubbering I adjust PC111 and then starts backfiring, not bad but bad enou by: bowzram on: 11/14/2008 -
2 repl
ies
|
rear brake squeaks when applying pressure does anybody else have this problem? by: Guest on: 11/11/2008 -
4 repl
ies
|
testing Bike HELP!! section...ignore by: 47Knuckle-Dragger on: 10/27/2008 -
1 repl
y
|
i have the standard 21inch whell and tire on front ive been told if i put 16inch on front will improve ride alot? by: gator7686 on: 9/25/2008 -
4 repl
ies
|
2000 RECALLS by: KSWOLF on: 9/21/2008 -
1 repl
y
|
I have a problem with shifting into first gear. Doesn't fully engage in first. All other gears are fine. by: Guest on: 9/13/2008 -
2 repl
ies
|
front end seems loose. Is it time for neck bearings? by: Guest on: 9/6/2008 -
2 repl
ies
|
directionals, odometer, and brake lights stopped working. Red key for alarm is constantly illuminated. Checked harness behind headlight and under dash. Help!!!! by: Guest on: 9/6/2008 -
1 repl
y
|
Where should the crankcase breather be positioned on a 77 fxe? Some say as low as possible, like on the bottom of the frame. Others say up high at least at above the crankcase if not at seat height.
by: Guest on: 9/5/2008 -
3 repl
ies
|
I get a front end wobble, it has happened a few times mainly at about 80mph while in a left turn. I have read a couple of articles about it but am looking for anyone that has tried any of the aftermar by: Guest on: 8/30/2008 -
4 repl
ies
|
Tired of paying the stealer. What aftermarket oil do you people recommend for engine/transmission ? I have been using the H.D. 20/50 synthetic but hoping I can get better , or just as good oil for ch by: Guest on: 8/28/2008 -
6 repl
ies
|
Porting heads on a twin cam any advice on bench top porting with a die grinder by: BIGFISCH2000 on: 8/14/2008 -
3 repl
ies
|
any issues with changing a oil bath chain to a belt. by: zoom on: 8/1/2008 -
7 repl
ies
|
Looking For Original Hd Service Manual For This Trike!! by: Guest on: 8/1/2008 -
|
bike hesitates when you crack open the throttle at any speed unless you keep the rpms up by: BLUEWHEELER on: 7/24/2008 -
1 repl
y
|
Thunderheader Bracket Breaking by: JUSTUS on: 7/23/2008 -
2 repl
ies
|
Chirping in '07 primary by: Chrash on: 7/15/2008 -
|
RISER TORQUE? by: KSWOLF on: 7/9/2008 -
1 repl
y
|
Front end wants to wobble at 65-70 mph. Started when I installed 2 in risers to my 18 in apes. Risers are tight but have a lot of travel in them maybe 2 in. Will harder bushings solve the problem. It by: Guest on: 6/28/2008 -
2 repl
ies
|
Just bought a Donnie Smith gurder front end that is missing nuts for the top of shaft that goes threw the neck by: BIGFISCH2000 on: 6/24/2008 -
1 repl
y
|
Bike has low profile harley shocks.Is there any other shcok I can use to lower it 1 or so more? by: wolf on: 6/18/2008 -
2 repl
ies
|
testing ignition components by: bikernerd99 on: 5/21/2008 -
3 repl
ies
|
I've lost 2nd gear. Had this problem before [at around 35k I have 70k on it now]] and it turned out to be the flimsy snap ring that holds the detent plate in place. by: Guest on: 5/16/2008 -
|
Exhaust pops when accelorating in second and all the time when slowing down or throtteling off. by: Onin on: 5/13/2008 -
2 repl
ies
|
Bike stalls like it ran out of gas at different times. Now wont start. by: Guest on: 5/12/2008 -
3 repl
ies
|
WHAT COULD BE THE PROBLEM? by: KSWOLF on: 5/11/2008 -
1 repl
y
|
it has rust in the gas tank is that a major problem? by: wolf7777 on: 5/11/2008 -
4 repl
ies
|
starter relay mapping by: beau on: 5/11/2008 -
1 repl
y
|
where does the starter relay mount on a 77 fxe? by: beau on: 5/9/2008 -
1 repl
y
|
I broke a fin from the engin head, is there a way to fix it? And is there an easy way to prep and clean the engin fins before I paint it? by: ognom on: 4/17/2008 -
3 repl
ies
|
under hard acceleration bike hesitates by: hammerhead1 on: 4/16/2008 -
1 repl
y
|
Just had the whole freaking engine basically replaced - from connecting rods to pistons to cylinders being rebored - only 28K miles - this cannot be normal, no? by: Slates on: 3/31/2008 -
5 repl
ies
|
I am wondering if anyone has a front stoplight switch that they can measure the diameter and length of plunger lying around. Thanks
by: luckierx on: 3/21/2008 -
2 repl
ies
|
are these extended warrantys worth it ?
or am i throwin my bucks away ! i got 5 yrs. fer 2 grand by: liveharley on: 3/13/2008 -
4 repl
ies
|
this is first bike with drive belt, all others had chains, how long do them belts last? by: wizard on: 3/4/2008 -
6 repl
ies
|
Opinion or advice, lookin for both. I want to take out the chains and install gears for the cams. Not lookin to boost power, I mean if it does great but, just lookin to get rid of the chains and tensi by: madmidget on: 3/1/2008 -
9 repl
ies
|
copper stud on HD circuit breakers by: bikernerd99 on: 2/28/2008 -
1 repl
y
|
anybody have old HD parts books? by: bikernerd99 on: 2/27/2008 -
2 repl
ies
|
IS a yost Power tube worth the effort in a CV carb.Have SS on it now but its getting loose and worn. by: dirtyundies on: 2/26/2008 -
2 repl
ies
|
Retro Kit for the radio?
I pulled factory radio out and want to put in a Kenwood but I reall dont want to spice and soilder wires behind the fairing...Any one have any Idea's....Thanks Isby by: Anonymous on: 2/21/2008 -
2 repl
ies
|
anyone bolted on the bigger jugs yet? by: MarkGoff on: 2/19/2008 -
|
testing by: 47Knuckle-Dragger on: 1/21/2008 -
6 repl
ies
|
No problems...just testing! by: 47Knuckle-Dragger on: 1/7/2008 -
6 repl
ies
|
Clunking when rolling forward ????? by: Toolmakr on: 12/23/2007 -
4 repl
ies
|
what is the best way to polish my wheels manly the outer rim which is dull and spotted by: BLUEWHEELER on: 12/13/2007 -
3 repl
ies
|
Scanalyzer by: Slyde on: 11/26/2007 -
5 repl
ies
|
Looking for original sagglle bags ?? by: hardtotell on: 11/20/2007 -
|
Cable lenghts by: RICHIETATTOO67 on: 11/7/2007 -
1 repl
y
|
I need to repair my clutch and need a manual section by: Ted on: 10/27/2007 -
3 repl
ies
|
oil sumping by: Fathead1 on: 10/23/2007 -
2 repl
ies
|
1.7:1 rockers by: JimmyD on: 10/17/2007 -
1 repl
y
|
big wheel on wide glide by: biggles on: 10/14/2007 -
2 repl
ies
|
What the hell fits this bike? by: fourfortyfour on: 10/14/2007 -
3 repl
ies
|
purchased a 2002 road king classic screaming eagle paint set with a EFI tank, need to purchase a petcock adapter (pingel kit did not work) by: CtJim on: 10/13/2007 -
2 repl
ies
|
Did the Harley Shop screw with my bike? by: Streetduck on: 10/13/2007 -
2 repl
ies
|
RAKED TREE by: KSWOLF on: 10/6/2007 -
4 repl
ies
|
Oil spray by: JimmyD on: 10/4/2007 -
1 repl
y
|
oil leak by: wizard on: 10/2/2007 -
1 repl
y
|
How about timing? by: JimmyD on: 9/30/2007 -
7 repl
ies
|
1/2 throttle then nothing. by: JimmyD on: 9/30/2007 -
3 repl
ies
|
After warm up oil pressure goes very low by: Anonymous on: 9/29/2007 -
8 repl
ies
|
SOFTAIL FOOT CLUTCH by: Anonymous on: 9/21/2007 -
2 repl
ies
|
Squeaky drive belt by: Mac3663 on: 9/19/2007 -
2 repl
ies
|
DTC codes P0122 and U1255 by: luckierx on: 9/17/2007 -
4 repl
ies
|
Gear Slip? by: Bushman on: 9/12/2007 -
1 repl
y
|
tumblers in ignition fail? Don't carry anything on key ring to cause excessive vibration or weight. Better system?? Respects by: FMF_Doc on: 9/9/2007 -
2 repl
ies
|
wet or dry ? by: uncle_fester on: 9/8/2007 -
339 repl
ies
|
testing-ignore by: 47Knuckle-Dragger on: 9/7/2007 -
1 repl
y
|
3 BDL open belt by: switch on: 7/31/2007 -
3 repl
ies
|
Is there a good upgrade for the stator? I only run a headlight and tail light. Is a molded or unmolded better? by: FLHS1200 on: 7/21/2007 -
6 repl
ies
|
noise in top of valve area front cylinder by: cheat on: 7/19/2007 -
2 repl
ies
|
backfired and then shut off and wont start? by: wolf7777 on: 7/14/2007 -
5 repl
ies
|
Why do clutches drag? by: JimmyD on: 7/10/2007 -
2 repl
ies
|
Why do clutches drag? by: JimmyD on: 7/10/2007 -
7 repl
ies
|
2 over -how much fork oil? by: switch on: 7/8/2007 -
1 repl
y
|
Front brakes make noise by: H.D.30-06 on: 7/5/2007 -
1 repl
y
|
noise from valve area of motor by: cheat on: 7/2/2007 -
|
speedo cable broke by: turtell on: 6/29/2007 -
2 repl
ies
|
keeps fowling plugs have a SS super e been appart 4 times already jeted as low as can jet it still fowling plugs has a tunder jet on it to but on long rides at open trottle shes ok ?? by: scorp61 on: 6/26/2007 -
4 repl
ies
|
bendix acts like accel pumps shoots too much fuel in. by: JimmyD on: 6/19/2007 -
2 repl
ies
|
I'm looking for a slightly used RoadKing... by: MeatandCheese on: 6/19/2007 -
2 repl
ies
|
coughing bad when held steady at anything under 3400rpm by: Anonymous on: 6/12/2007 -
6 repl
ies
|
by: biggles on: 6/10/2007 -
|
Bad vibration coming from primary side replaced tension shoe , still vibrates Any body know what the hell by: Anonymous on: 6/4/2007 -
1 repl
y
|
noise from motor by: Anonymous on: 5/30/2007 -
8 repl
ies
|
Passenger Floorboard Part #? by: Neanderpaul on: 5/25/2007 -
2 repl
ies
|
light clutch by: biggles on: 5/21/2007 -
5 repl
ies
|
When not under a load, my bike runs uneven and pops by: MeatandCheese on: 5/13/2007 -
9 repl
ies
|
Drive belt snapped by: H.D.30-06 on: 5/7/2007 -
6 repl
ies
|
Base Seal Leak Problem by: mgfan on: 5/5/2007 -
1 repl
y
|
Damaged shaft bushing by: Dutch on: 5/5/2007 -
4 repl
ies
|
airforce rip off by: biggles on: 5/2/2007 -
7 repl
ies
|
Can I put a 150 rear tire on a stock 97 fxd with no modification by: igor on: 5/2/2007 -
4 repl
ies
|
adjustable tranny plate ? by: Bluto on: 4/26/2007 -
1 repl
y
|
i have a gas leak on bottom side of right side tank..how tdo i get it off and fix or do i need someone who know what they doing by: diamit on: 4/25/2007 -
7 repl
ies
|
WD40 Statement by: Mark_Goff on: 4/20/2007 -
2 repl
ies
|
anyone have a service check sheet by: skullsrider on: 4/17/2007 -
4 repl
ies
|
Seating header and muffler by: USMCLifer on: 4/5/2007 -
1 repl
y
|
It don't work!!!!!!!!! by: Mark_Goff on: 4/5/2007 -
2 repl
ies
|
Front end vibration at speeds over 65mph by: steven on: 3/13/2007 -
5 repl
ies
|
Want straight pipes. it was sugested i put a resistor on to keep from having to tweak the computer. Tips, hints,suggestions? by: Bubber on: 3/13/2007 -
3 repl
ies
|
harley re map by: rommel on: 3/7/2007 -
5 repl
ies
|
Trans mainshaft broke in half by: switch on: 3/5/2007 -
3 repl
ies
|
i am thinking on buying a newer ride by: ringo on: 3/1/2007 -
6 repl
ies
|
Pipes. by: gr on: 2/27/2007 -
2 repl
ies
|
how do I determine the right offset on the tranny sprocket, the right offset on the tranny plate and the spacing of the rear tire to get primary - tranny - and rear tire in proper alignment by: Bluto on: 2/19/2007 -
1 repl
y
|
Oil flow problems on softail tc88 by: Daddio on: 2/19/2007 -
2 repl
ies
|
Has any one had any problems with the LAbriola 5 speed sucide shifter, like clutch cable breaking or shit not lining up. I got the parts coming just wanted to no if I would run into any problems. by: rommel1833 on: 2/16/2007 -
1 repl
y
|
A source for a replacement regulator / stator plug and socket? by: bobp on: 2/12/2007 -
3 repl
ies
|
Replacing fork seals by: H.D.30-06 on: 2/4/2007 -
1 repl
y
|
Weld on hard tail by: psycho on: 1/29/2007 -
2 repl
ies
|
Issues with stock 6 spd trans by: USMCLifer on: 1/19/2007 -
3 repl
ies
|
Thanx Knuckle Dragger,whats your opinion of Andrews gear drive setup? by: woodbutcher on: 1/11/2007 -
2 repl
ies
|
TwinCam tension shoes shot at 20k,normal or bullshit? by: woodbutcher on: 1/11/2007 -
4 repl
ies
|
I've recently rebuilt breathers, replaced intake gasket, replaced timing sensor, upgraded ign. modual and coil, bike ran great , now it's misfireing. What do I look for now ? by: Anonymous on: 1/8/2007 -
2 repl
ies
|
Speedo Restoration by: BladeRunnerTN on: 1/8/2007 -
2 repl
ies
|
Here recently I've been thinking of wrapping my exhaust pipes, but I'm not sure how much of a temperature increase that might bring on. Would I have to keep on eye on my OEM valves? by: Sparkie on: 1/7/2007 -
3 repl
ies
|
Cam choice by: 2wheel on: 1/6/2007 -
|
I need some advice on starting my sporster in the cold. I live in Texas and it is not really that cold (50 deg.), but I am having trouble starting my bike. It wont turn over and I end up wasting the b by: 20w50 on: 1/3/2007 -
5 repl
ies
|
I have a problem with gas coming out of the breather when i ride it hard,i've tried different types of breathers but still the same. I have a hyper charger breather on it now. by: mcclood on: 12/14/2006 -
4 repl
ies
|
V-Twin MFG offer a 87 knuckle with an SS bottom end is it kickable the compressions are high(for a Harley) by: Anonymous on: 12/4/2006 -
2 repl
ies
|
OIL ON CLUTCH DISCS, CLUTCH SLIPS by: Anonymous on: 12/2/2006 -
5 repl
ies
|
Liquid Gasket by: FX on: 11/29/2006 -
3 repl
ies
|
What are the options on buying aftermarket motor by: james on: 11/15/2006 -
2 repl
ies
|
Can I fit an Aftermarket Knuckle or pan engine in this frame by: james on: 11/4/2006 -
|
Looking for a good machinist/wrench in TN by: 71HDFX on: 10/25/2006 -
2 repl
ies
|
PUT NEW HARLEY BAGS ON MOVED PLATE AND TURN SIGNALS FURTHER TO THE REAR NOW EVERYTHING IS WORKING GREAT BUT THE LEFT REAR SIGNAL IS NOT WORKING BUT IT COMESON WHEN I HIT THE BRAKE LIGHTS by: Anonymous on: 10/22/2006 -
|
How to find parts.... by: MeatandCheese on: 10/20/2006 -
4 repl
ies
|
Thunderheader Pipes by: jlo on: 10/20/2006 -
|
Changing the "brain" by: Anonymous on: 10/18/2006 -
1 repl
y
|
bike is only getting 24 miles to the gallon by: Mark_Goff on: 10/3/2006 -
136 repl
ies
|
Anyone know about Hooker Headers Pipes by: dahfatboy on: 9/30/2006 -
4 repl
ies
|
I am thinking of splitting the cases by: Mark_Goff on: 9/19/2006 -
3 repl
ies
|
Is the 95 cu. in. big bore kit with cams worth it if you would like more low end torque? by: KJHOG on: 9/13/2006 -
4 repl
ies
|
Odd Chirp sound from front end by: Anonymous on: 9/13/2006 -
4 repl
ies
|
ignition won't shut off. turn off and bike keeps running. dirty terminals somewhere? by: scootercool on: 9/12/2006 -
4 repl
ies
|
ignition by: scootercool on: 9/11/2006 -
1 repl
y
|
put wide glide triple tree kit on and want to put 16" wheel up front can anyone tell me which wheel i can go with from other harley by: skaboo on: 9/1/2006 -
1 repl
y
|
what does STOCK meen when they say that the bike streched 4" over stock in the back bone. I understand if you were reworking a frame but what about the fully custumed framed bike, what would be stock by: Anonymous on: 8/29/2006 -
1 repl
y
|
Does anyone else have a problem with tail-light bulbs in side-mount license plate brackets? by: Shovelhead on: 8/17/2006 -
2 repl
ies
|
Has anyone ever tried feezing water in a tank to pop out dents? by: Meat_&_Cheese on: 8/17/2006 -
5 repl
ies
|
looking for a good machinist in the CDA Id, spokane Wash. area. by: Anonymous on: 8/14/2006 -
|
should I install a crankcase breather by: Anonymous on: 8/9/2006 -
2 repl
ies
|
i want to put raked trees on my bike how much will it lower the front end if i stay with stock forks by: Anonymous on: 8/6/2006 -
1 repl
y
|
Engine "diesels" after shutting it off. by: H.D.30-06 on: 8/3/2006 -
3 repl
ies
|
Want to stretch front end. So, last time I entered, I fucked it (quest) up. So- I want to do a 2 - 4 inch over on wide glide. Currently all chrome but stock frame, tubes, triple trees etc. What are th by: Bomber_Bob on: 8/1/2006 -
7 repl
ies
|
Front end stretch by: Bomber_Bob on: 7/30/2006 -
3 repl
ies
|
looking for a generator by: Anonymous on: 7/23/2006 -
3 repl
ies
|
What would cuase a bent push rod? by: jwebb47 on: 7/18/2006 -
3 repl
ies
|
Pitting rust on wheels and Triple tree by: FMF_Doc on: 7/17/2006 -
4 repl
ies
|
Power drop/stall at accelleration. by: RoadThing on: 7/15/2006 -
1 repl
y
|
has a vibration that goes away at 50 miles an hour but is real bad under that speed motor mounts seem fine by: john_O on: 7/14/2006 -
4 repl
ies
|
AT 75-80 MPH BAD SPEED WOBBLE WOULD DROPPING THE FORK TUBES 2" HELP WITH THIS ? by: Anonymous on: 7/14/2006 -
1 repl
y
|
Is it possible to modify a cdi from 1 bike to use on a similar sized bike? by: debb on: 7/14/2006 -
5 repl
ies
|
LOW RPM'S...SPITTIN AND SPUTTERING?? by: Anonymous on: 6/30/2006 -
4 repl
ies
|
need a great painter in the buffalo n y area by: borntoride3157 on: 6/30/2006 -
8 repl
ies
|
Oil - Synthetic or regular ? by: madmidget on: 6/26/2006 -
9 repl
ies
|
damn chirping sound as well....&^%$# by: Geezy#13 on: 6/22/2006 -
4 repl
ies
|
I was wondering in anyone could point me in the direction of a good paint shop in the San Francisco bay area? [ I'm in the east bay area] Any info would be appreciated. Thanx by: H.D.30-06 on: 6/21/2006 -
2 repl
ies
|
Bike needs a paint job. by: H.D.30-06 on: 6/21/2006 -
2 repl
ies
|
What are the best tires to run for all-weather traction? by: wildone on: 6/18/2006 -
4 repl
ies
|
Chirping sound by: Anonymous on: 6/16/2006 -
2 repl
ies
|
Bike handles badly...is there a solution that won't break me? by: shovelheadjim on: 6/9/2006 -
2 repl
ies
|
Motor oil in the primary by: mulder7pac on: 6/7/2006 -
8 repl
ies
|
oil dip blew off like a rocket why? by: chop on: 6/7/2006 -
7 repl
ies
|
Register
